Bucket seat brackets set made of aluminium 4 mm plate. Has a wide range so every seat will fit. They are mounted with 4x M8 bolts on 40, 45 or 1.5' profile, or directly onto...
This monitor mounting bracket is designed to integrate with any Sim Lab racing cockpit and provides a neat solution, mounting your monitors directly to the rig without the need for additional support. Holds monitors securely...
Universal seat slider kit. Suitable for most seats including Sparco, Sim Lab, OMP, Corbeau, Recaro, Bride and many others. Enables seat to be adjusted forwards and backwards.
Bolt longitudinal distance: 270mmSlide Travel: 145mm
This mousepad is designed to attach to a section of aluminum profile for use on a Sim Lab sim racing cockpit. Constructed from 3mm thick aluminum, the mousepad provides a solid platform and features a...
Keyboard tray to mount straight on your profile rig, can be used left and right handed. One size ' 500Ç?200 mm ' to fit most keyboards. The Inclination is adjustable and it can swivel. You...
This simple but effective clip keeps the wires on your sim racing rig neat and tidy. They easily fit into aluminum profile slots on the cockpit chassis and accept cable ties to hold the wires...
Fanatec shifter mount made from 8 mm thick aluminium. Mounting is done by the provides slot nuts that slide into the sides of the Fanatec Clubsport shifter. It can be used in horizontal position and...
Help keep your fluids up during those long stints with this handy cup holder. It can attach directly to aluminium profile and is made from solid plastic. Easily attaches to Sim Lab cockpits Provides a...
This pedal slider baseplate is designed to fit the Heusinkveld Pro or Ultimate pedal sets. The plate can be mounted to a universal seat slider to allow for quick and easy adjustment independent to the...
Designed to mount the Fanatec club sport shifter to a Sim Lab chassis, this mount can be used in various orientations to allow for optimum positioning for either right or left hand gear shifts. Provides...
These caster wheels are ideal for if you need to move your sim cockpit for cleaning or rearranging a room. Supplied in a set of four, two of the casters feature a strong brake to...
Designed to provide enough space to store a PC or a direct drive control box, this handy shelf attaches to the main uprights of the P1 or GT1 Evo. Being constructed from 5mm thick, black...
Designed for use with the triple monitor stand, this add on bracket allows for the mounting of an additional monitor. Traditionally, a fourth monitor is used to display a dashboard or data screen, but can...
Designed to allow sim racing handbrake systems to mount onto a Sim Lab racing cockpit, these handbrake mounting plates are available to suit either the Heusinkveld Engineering or Fanatec handbrake units. Provides easy mounting of...
These aluminum, laser cut mounting plates are designed to allow dedicated shifters to be mounted to a Sim Lab racing cockpit. Constructed from 5mm thick aluminum for strength and durability. There are various options to...
Button box holder This button box holder to be mounted on 8020 frame. The holder can swivel and the button box can be tilted backwards. The brackets can be moved to be adjusted and fitted...
*Updated* The baseplate allows pedals being mounted on the Sim-Lab seat slider, which makes it easy to quickly adjust the position of the pedals relative to the seat. Also it can be used without the...
These speaker mounts let you mount your speakers onto an aluminium frame. The brackets are made for speakers with a M6 mounting hole, and sold as a set of 2 (lef and right version). Bolts...
Fancii USB Sim Fan, Twin Turbo Blades, Whisper Quiet Cyclone Air Technology Twin turbo Cyclone-Blade technology provides maximum airflow to keep you cool anywhere, anytime 25% quieter and 40% more powerful than similar models |...
Front mount bracket is made from 15mm black coated aluminium plate. Package contains: Front mount bracket assembly (600 mm width) Side brackets Four connector brackets Caps and fasteners NOT INCLUDED SLOT NUTS Supports following servo...
This extra mounting point is ideal for mounting a shifter or handbrake and can be configured in countless ways. It is made from a high-grade aluminum which makes for a very rigid feel. The mount...
If you are planning to use your Sim Lab racing cockpit on a hard floor, you are going to want to pick up this set of rubber feet. Not only do they protect hard floors...
Don't let your sim setup be spoiled by an untidy rats nest of wires! The Digital Motorsports cable management kit contains a range of solutions to help organise and tidy up all of your sim...
In case your monitor has a recess, you can solve this by using spacers to offset the VESA mount from the supporting profile arm. M4x10mm. Set contains 4 spacers.
Fanatec podium mounting bracket This Fanatec podium mounting bracket is used to side-mount the DD1 or DD1 Fanatec podium drive wheel to your aluminium profile (8020) cockpit. The slotted holes making it possible to tilt...
Primarily designed for applications where VR (virtual reality) is being used for driving, this single monitor mount, which is specific to the GT2 chassis, offers a simple mounting option for when a large range of...
This one piece manufactured wheel deck bracket from aluminium hard-mounts Fanatec, Logitech, Thrustmaster and the AccuForce wheels. All Fanatec Club Sport range and CSL range wheels are supported. The side-plate are welded giving the bracket...
Ricmotech Sequential Shift Mod Plate FOR Thrustmaster Shifter TH8RS and TH8A The Ricmotec Tactile-Feedback shift mod adds a "Click-Clack" feeling to the shifter lever. Designed to replicate the ratcheting mechanism felt when shifting a sequential shift...
Side mount for GT2 and TR1 chassis. Use this to mount your shifter or handbrake on the GT2/TR1 sim racing chassis. Shifter/handbrake mounting plates are not included.
Length of side mount profile: 320 mm.
This additional side mount allows you to mount a shifter or handbrake to your GT2 or TR1 chassis via a length of additional aluminum profile. Does not include shifter or handbrake mounting plates. Length of...
This kit upgrades your current P1 to the newer P1-x sim racing cockpit. Included: Pedal plate & feet 15 mm lasercut brackets 40x160L Aluminium profile ' 470 mm long 40x80L Aluminium profile ' 470 mm...
This VESA universal mount has all VESA mount patterns incorporated. VESA Size: 75x75, 100x100, 100x200, 200x100, 200x200, 200x400, 400x200, 400x400. The plate is mounted onto a 40x80 or 45x90 profile. Size of the plate: 420x420x5,...
Aluminium adapter piece that fits on the MiGe 22 mm axle. It clamps the axle with 2 bolts for a tight fit. Anodised black finish. Features: Suited for Mige "small" 130ST-M10010 Suited for Mige "Large" 130ST-M15015 Adapter side...
This clip inserts onto the slot profile, and can be used for securing cables using a tie-wrap. Suitable only for slot 8 profiles.
Packaged by 10 per bag.
A direct drive wheel mounting bracket for direct-drive motors. It has a Fanatec bottom mounting pattern so any cockpit wheeldeck with this pattern is compatible. All mounting hardware included. Compatible with the following motors:...
NLR motion base mounting brackets for P1(-X). These brackets allow to lower the NLR motion base into the P1(-X) chassis and obtain a normal seating position.
The Original Direct drive MiGe Servo mount. The mount works with:
SimuCube 2 (Sport, Pro, Ultimate)
Mige 130ST (Original small and large OSW MiGe)
Bodnar Sim Steering System
All bolts and mounting material included.
An aluminium diamond 4 mm thick plate to use as a footrest to be mounted in between the P1-X base profiles or the new GT1-EVO 2020 model. 4 corner brackets included. Dimensions 490 x 350...
Sim foot rest can be mounted on profiles or on baseplates with slotted holes. Intended to be mounted next to the pedals to give the left foot support when not using it to operate the...